Manicure cutter BUCOS KRYPTON II XPS-350

The most powerful model on the market of the beauty industry is the Krypton II professional cutter

An improved model of a milling machine, worked out to the smallest detail, which will make the work of the master more comfortable and productive.

High power of 70 W and the number of revolutions of 35,000/min - allows you to easily and effectively perform hardware manicure and pedicure. The milling cutter is very convenient and ergonomic. It has the highest power among professional milling machines.

The micromotor handle works smoothly and with a complete absence of vibrations.

It is equipped with an easy-to-use mechanism for changing cutters. The clamp firmly fixes the cutter and is conveniently located on the central part of the case, which makes it impossible to open the clamp during operation.

The most compact control unit, compared to analog models, which will take up a minimum of space on the desktop.

The stylish, improved form of the block is equipped with a modern LED display, which displays the actual revolutions and operating mode of the milling machine.

All control buttons (forward/reverse, foot control, speed control) are now in front of the master's eyes, no longer need to get confused and look for them on the side.

An increased number of holes for cutters on the body, now all necessary cutters are always at hand.

Handle holder - now it is located at an angle that prevents the cutter from hitting the table, any length and size of the cutter will no longer damage your workplace.

KRYPTON II is equipped with three cool functions that will divide the life of the master into "before" and "after", and most importantly: make work comfortable and fast.

"EASY CONTROL" function - smart electronic Forward/Reverse switching on the go.

When working with Krypton II, you are right in the process, press the button to change the direction of the cutter and the processor of the cutter will do everything for you.

With this function, you not only save your own time and the time of the client, but also reduce the risk of device breakdown several times. In simple words: you switch from a manual car control box to an automatic box.

"FREE FOOT" function

In most routers, the handle works only by constantly pressing the pedal, because of this the leg is constantly in tension, and the pedal seems like an unnecessary accessory. When developing the Krypton II, we modernized the operation of the pedal. Now it performs the function of pause. That is, with the foot control mode, you set the working revolutions, make one press of the pedal and work. If you need to pause your work, you just click the pedal one more time. By clicking again, the router will continue to work at the previously set speed parameters and save you a lot of time again.

"PROTECTION+" function - overload protection

revised and improved, well known to everyone.

It will protect your router from overloading and save the router from breaking in cases where you inserted the router and did not close the lock on the handle tightly or turned on the revolutions without installing the router. After 3-5 seconds, the router will beep, you will see the error code E4 on the display, and the router will automatically lock to prevent damage to the micromotor or collet.

Also, this function will come in handy if the size of the cutter is selected incorrectly in relation to the set revolutions. For example, you work with a heavy milling cutter or drill press at high speeds for a long time, the milling cutter will automatically determine the overload limit, give you an error and stop work.

All you need to do is pause a little to restart the router.

- Compact portable control unit

- Smooth speed control

- LED display with display of current revolutions and mode of operation of the milling machine.

- Intelligent electronic FW/REW switching on the go

- Improved foot control pedal

- Long-term operation without noise, vibrations and overheating

- Improved function of protection of the cutter against the load

- Cooling of the pen

- Power Supply;

- micromotor handle;

- pedal for foot control;

- pen holder;

- Operating Instructions;

- warranty card;

- warning letter.