Nail Drill JSDA JD7G, 120W 50,000 rpm ORIGINAL

The JSDA JD7G milling machine is one of the best models for professional hardware manicure and pedicure in terms of price-performance ratio.

The maximum operating speed of 50,000 rpm and high power of 120 watts will make the milling machine an indispensable assistant for the master of any professional beauty salon. It copes very well with high loads and is suitable for working with a large flow of clients. The torque of 6.8 N/cm allows you to work comfortably at any speed, even with large diameter milling cutters.

The model is equipped with a convenient button that regulates the speed of rotation and simultaneously serves as an on/off button.

The main advantages of the JSDA JD7G

- The presence of a brushless wear-resistant micromotor. Thanks to the new generation micromotor, this device will last you longer;

- The ability to maintain a set rotation speed. When the resistance of the milling cutter increases, the device automatically increases the engine power to maintain the required number of revolutions;

- Function of automatic memorization of the current speed of the cutter when the device is turned off.

Main characteristics of the JSDA JD7G manicure cutter

- Low operating noise and no vibration at any speed;

- Two control modes - by the regulator on the device body or by pressing the floor pedal;

- LED screen, which displays the number of set speeds;

- No engine heating during prolonged operation;

- Overload protection;

- Ability to work in direct and reverse mode;

- Twist-Lock function - secure fixation of the cutter, which protects it from breakage.