Nail Drill Saeshin Strong B350/H350

Name: Nail Drill Saeshin Strong B350/H350
Brand: Strong
SKU: K1961
Price: 6468 UAH
Availability: InStock

Top

Model: K1961

Brand: Strong

Short description

Specifications

Country of manufacture - South Korea

Number of revolutions per minute (rpm) - 40000

Power - 64 Вт

In stock

6 468₴

Description Nail Drill Saeshin Strong B350/H350

Strong B350 is a new upgraded version of the Strong 210 device. The novelty has an original design of a block in the shape of a parallelepiped with a beveled front panel, on which the speed regulator is located. The manufacturer has updated the functionality, increased the power and speed of rotation. The design of the device and the tip are designed for use in beauty salons with a constant flow of clients. Uninterrupted operation for up to 12 hours or more allows you to use the device in several shifts. This model is completely free of vibration and noise from the micromotor. The new H350 micromotor, like the 105L, is painted in a rich blue color, but at the bottom of the handle, in the place where the fingers grip it, there are special notches to ensure a secure grip.

The entire series of Strong manicure devices is manufactured at the Saeshin brand factory (South Korea). The factory is equipped with innovative equipment with computer control, which guarantees the highest quality of the cutters.

The model has high power - 64 W, which allows you to perform manicures and pedicures at a professional level.

The micromotor handle does not heat up during operation, each tip has a special air collector for the passage of cold air, which ensures uninterrupted operation for a long time.

The collet clamp of the cutter firmly fixes the cutter in the tip, and replacing the nozzles takes no more than 3 seconds.

The absolute absence of vibration is ensured by 4 bearings contained in the micromotor design. The cutter does not vibrate and the surface of the plates is processed perfectly smooth.

The reverse function makes it possible to quickly change the direction of rotation of the cutters in both directions, and in all Strong devices you can use cutters with a reversible notch.

There is automatic overload protection, which is provided by the built-in device shutdown function.

The block material is durable plastic with thickened walls.

Characteristics:

Power: 64 W
Rotation speed: up to 40,000 rpm
Torque: 3.0 N/cm
Powered by mains, voltage: 220-230V, 50Hz
Weight: control unit - 1.2 kg, handle - 0.216 kg

Complete set:

Control unit
Strong 105L micromotor handle
Foot control pedal
Hanging stand for the tip
Disassembly key
Set of spare carbon brushes

Operating recommendations:

Do not turn on the router or close the handle without a nozzle.
Do not switch on the reverse while the device is running.
Do not overload the router with too large and heavy nozzles.
Follow the recommendations of the router manufacturer.
During use, check the tactile temperature of the milling unit: if it is hot, stop working and wait for it to cool completely.
Do not force the milling unit to cool (do not place it under air conditioning, do not put ice, do not use a hairdryer, etc.), this may damage the board.
Keep the device clean and clean it of dust and other contaminants.
Working at a lower speed provides greater comfort for the client, extends the service life of the attachments and the milling unit itself.
To avoid problems associated with voltage drops in the network, it is recommended to connect the milling unit through a voltage stabilizer.