Manicure lamp LED+UV SUNUV SUN 5 48W (Original)

Description Manicure lamp LED+UV SUNUV SUN 5 48W (Original)

This is a hybrid UV and LED lamp of the new generation.

The SUNUV SUN 5 LED+UV lamp is designed for the polymerization of gel varnishes (shellac), nail extensions and any coatings that include gel (for example, biogel).

UV LED lamp, which is perfect not only for home, but also for beauty salons. The lamp for polymerization has several time settings, which makes it very convenient to use and will become an indispensable assistant for a manicurist.

You don't need to monitor the curing time of the varnish at all.

UV LED lamp SUNUV SUN 5 can work up to 50,000 hours.

A versatile, powerful lamp with a modern design. The entire design and curves of the lamp are thought out perfectly, the lamp is like from the future: glossy white plastic, with a three-digit display insert, buttons with a convenient location for the master. The removable bottom allows you to conveniently use the pedicure lamp.

Functions of the buttons of the SUN 5 lamp:

• "10s" - Timer for 10 seconds.
• "30s" - Timer for 30 seconds.
• "60s" - Timer for 60 seconds.
• "99s Low heat mode" - Turning on/off the device, gradual mode switching from 24 W to 48 W, timer for 99 seconds. The lamp itself gradually increases the power: the first increase after 30 seconds, the next after 50 seconds to the maximum.

The lamp is turned on mechanically, by pressing the buttons on the case, or automatically, using a built-in sensor. When turned on by the sensor, the lamp works for 120 seconds.

The lamp is also turned off automatically by the sensor or by pressing the button of the working time mode.

Smart 2.0 technology - this function better protects the body and parts of the lamp from overheating, as well as the nail plate during drying.

With prolonged use, the temperature inside the lamp may increase. The function of automatic temperature control is built into the lamp. When the temperature becomes too high, the lamp automatically switches to energy-saving mode and the status "07g" flashes on the display. The timer will resume once the temperature has dropped to a safe level.

Characteristics:

• Power: 48 W
• Number of LEDs: 24 pieces
• There is a removable bottom
• Polymerization period: gel-lacquer – 5-30 seconds, led-gel – 30-60 seconds.
• There is a motion sensor
• Operating modes: 99 seconds by default and timer for 10, 30, 60 seconds
• Dimensions: 21*10.7*10.3 cm
• Cord length: 150 cm

Complete set:

LED+UV lamp, cable, operating instructions.

All original lamps have a barcode seal on the bottom that matches the barcode on the lamp box. It is important to save the barcode for the entire warranty period. The warranty is provided only if there is a seal with a barcode without traces of its re-gluing.

This model is certified in Ukraine, there is a quality certificate that confirms compliance with all the declared properties and technical characteristics.

Warranty – 12 months!