Manicure lamp LED+UV SUNUV SUN 7 48W (Original)

Description Manicure lamp LED+UV SUNUV SUN 7 48W (Original)

This is a hybrid UV and LED lamp of the new generation.

The SUNUV SUN 7 LED+UV lamp is designed for the polymerization of gel varnishes (shellac), nail extensions and any coatings that include gel (for example, biogel).

UV LED lamp, which is perfect not only for home, but also for beauty salons. The lamp for polymerization has several time settings, which makes it very convenient to use and will become an indispensable assistant for a manicurist.

You don't need to monitor the curing time of the varnish at all.

UV LED lamp SUNUV SUN 7 can work up to 50,000 hours.

Another difference of this model is the ability of the lamp to work from a battery. The lamp has a slot for a battery (the battery can be purchased additionally). This possibility will save the master if an unscheduled power outage has occurred.

Battery lamp operating time: ± 50-60 minutes (continuous operation)

The SUN 7 lamp is designed in such a way that as little light as possible spreads outside the lamp and falls on the client's skin. So this lamp becomes the safest for people who suffer from allergic reactions or other diseases that appear from sunlight. The bottom is made of high-quality plastic, which is pleasant to hold.

The back cover is removable, which is convenient if you need to monitor the drying process.

Functions of the buttons of the SUN 7 lamp:

• "10s" - Timer for 10 seconds.
• "30s" - Timer for 30 seconds.
• "60s" - Timer for 60 seconds.
• "99s Low heat mode" - Gradual mode switching from 24 W to 48 W, timer for 99 seconds. The lamp itself gradually increases the power: the first increase after 30 seconds, the next after 50 seconds to the maximum.

The temporary memory function works for "10s", "30s" and "60s" buttons. The lamp remembers the mode when you press the button of the corresponding mode and hold it for about 2 seconds. The selected time mode is shown on the display. Pressing and holding again for 2 seconds or pressing other buttons with a timer will clear the memory.

The lamp is turned on mechanically, by pressing the buttons on the case, or automatically, using a built-in sensor. After turning on the sensor, the lamp works for 99 seconds. The lamp is turned off automatically by the sensor or by pressing the button of the working time mode.

There are 30 LEDs in the lamp, they are arranged so that the light is directed only to the nails as much as possible and less falls on the areas outside the drying zone.

Smart 2.0 technology - this function better protects the body and parts of the lamp from overheating, as well as the nail plate during drying.

With prolonged use, the temperature inside the lamp may increase. The function of automatic temperature control is built into the lamp. When the temperature becomes too high, the lamp automatically switches to energy-saving mode and the status "07g" flashes on the display. The timer will resume once the temperature has dropped to a safe level.

Characteristics:

• Power: 24 and 48 W
• Number of LEDs: 30 pieces
• There is a magnetic bottom
• Polymerization period: gel-lacquer – 5-30 seconds, led-gel – 30-60 seconds.
• There is a motion sensor
• It has a time memory function
• Operating modes: 99 seconds by default and timer for 10, 30, 60 seconds
• Dimensions: 21.2*21.1*9.7 cm
• Cord length: 150 cm

Complete set:

LED+UV lamp, cable, instruction manual.

All original lamps have a barcode seal on the bottom that matches the barcode on the lamp box. It is important to save the barcode for the entire warranty period. The warranty is provided only if there is a seal with a barcode without traces of its re-gluing.

This model is certified in Ukraine, there is a quality certificate that confirms compliance with all the declared properties and technical characteristics.

Warranty – 12 months!