Milling machine Saeshin Strong Brillian B100 Black/H300 SILVER

Aesthetic, unusual and comprehensively protected.

Saeshin, which produces high-quality and high-precision milling machines under the Strong brand, is today one of the world's leading manufacturers of precision manicure micromotor pens and dental devices. At the same time, the company strives to become a world leader in its industry.

Therefore, it does not stop there, but on the contrary, tries to meet the needs of as many of its main consumers as possible. And constantly studying the market for its products, Saeshin managers determined that their devices are in greatest demand among nail industry masters. After that, the company released a specialized, feminine and elegant manicure milling machine Saeshin Strong 210/105L.

As it turned out, this was not quite enough, so not so long ago a more advanced and powerful Saeshin 107ll micromotor handle was released, which is equipped with various control units in different modifications (Strong 207A, 209A and 210).

And then, with the increase in the number of the company's clients, it became clear that another client niche was not covered, which required even more reliable and even more technological, and, moreover, sophisticated and non-trivial devices for manicure/pedicure - the niche of luxury beauty salons. Therefore, the company released two, certainly the most extravagant and original devices under the Brillian brand, one of which we will tell you about in detail.

The Brillian Black device is so different from the general concept of a "Manicure Milling Machine" that even when you first look at its photos on the website, you have a strong desire to buy it.

Moreover, careful, attentive attention to detail and high quality have been and still are the hallmark of the Saeshin company. And thanks to the extraordinary design, undoubtedly unique solutions, radical new developments, as well as the high level of competence of Saeshin engineers and first-class assembly quality, they have come up with such a device that absolutely everyone likes.

And so, if you are a successful master in the Nail industry and are looking for an unusual, namely ultra-modern, high-quality, as well as trouble-free, safe and powerful tool, which, among other things, also meets the strictest hygiene and safety requirements, then the Brillian Black device is exactly what you need.

Let's start with the fact that the Brillian Black device is a set consisting of a control unit and a H120 micromotor handle. This ergonomic handle is designed taking into account the latest wishes of users and masters of the Nail industry who work with clients on the go, and is currently one of the highest quality, reliable and wear-resistant. Naturally, it has received an unusual, improved and very stylish black body. It is so miniature that it has a diameter in the place where the handle is held by the fingers of only 16 mm, and a length of 132 mm. The collet clamp has remained the same - it is a standard "Twist-Lock".

The motor of the micromotor handle is fixed in a housing made of high-quality plastic, and the shaft of its rotor and spindle is securely held on four Japanese sealed bearings, which in turn ensure the complete absence of radial runout. Also, thanks to this, it produces almost no noise during operation. And at a maximum speed of up to 30,000 rpm, it can reach a torque of 3 N·cm, which, however, is maintained at both medium and low speeds. In addition, in its rear part it has special technical holes that provide forced ventilation along the body during operation and help cool the micromotor. To top it off, it is worth saying that your hand will not get tired even during long work, because the weight of this handle is only 165 g.

But, undoubtedly, the most interesting and unusual thing in this set will of course be the handle's companion - the round Saeshin B100 Black control unit, equipped with several electronic protection systems against overloads and overheating of the handle and operating under the control of the latest microprocessor. In the upper part, along the entire perimeter of the unit, there is a steering wheel-type speed regulator. Turning it clockwise increases the speed, counterclockwise - decreases it. And in the middle of this “wheel” there is a screen on which the number of revolutions is displayed in the center. This value is also duplicated by the image of divisions along the perimeter of the screen circle. In addition, the screen shows the control you have selected (pedal/hand) and the direction of rotation. By the way, this block provides for switching to reverse when the handle is already working.

Next to the screen are three buttons: on/off, “pedal/hand” and reverse. And if you press the cutter to the surface being processed harder than it is calculated, and the engine speed starts to slow down, or the handle heats up from prolonged loads, then the overload scale will light up in the lower right corner of the screen, and the microprocessor, taking into account this data, will disconnect the handle from the power supply after 2-3 seconds, thereby “saving its life”. You can turn it on again immediately, but we recommend waiting a few minutes.

On the sides of the case there are connectors for connecting