Saeshin Strong 207S/H450 router

Strong 207s is the crowning achievement of Saeshin in the category of devices with brush motors. It is a real "monster", has huge torque and gigantic power. This is the most powerful milling machine from the Korean manufacturer among devices with collector motors. The main target audience is dental technicians, podiatrists and pedicure masters. If you work a lot with your feet, we bet you are familiar with the situation when at low speeds the milling machine simply stops, unable to withstand the load. With this "baby" you will forget about such a problem forever, because the torque of 6 N/cm and 200 W of power will be enough for you for any work. Separately, it is worth mentioning the Strong H450 handle, which has a number of features. It is equipped with new precision bearings with increased wear resistance, their resource is several times higher than that of conventional ones. This means that after the pedicure season, you will not have to run to the service to replace them. The micromotor is also equipped with the latest generation brushes, which made the tip even quieter. The control unit has received electronic "brains" in the form of a microprocessor, which provides torque to the motor exactly when it is needed, as a result, maximum power is available even at the lowest speeds.

As we wrote above, the device produces 200 W of power at a torque of 6 N/cm. The maximum number of motor revolutions is 45,000 rpm.

The micromotor is equipped with a cooling system, which is immediately felt during operation. A pleasant stream of cool air flows along the tip. The handle is equipped with a collet mechanism for clamping the "Twist lock" cutter. The time to change the nozzle takes no more than 2-3 seconds.

Absolutely all Strong devices are equipped with overload protection. This means that the electronics will sense when you overexert your "assistant" and at the right moment will intervene and turn off the router. After giving the device a few minutes to rest, you can use it further. Also on the control unit body there is a switch from 220 Volts to 110. This function is relevant only for craftsmen living in the USA, Canada, and several other countries around the world. Craftsmen from Ukraine do not need to switch anything there! otherwise the power supply will simply burn out in a matter of seconds!

Technical characteristics: