Microstop Clean universal tool and dry cleaner (500 ml)

Description Microstop Clean universal tool and dry cleaner (500 ml)

Universal tool for cleaning dry heat sterilizers and delicate cleaning of manicure tools MicroSTOP Clean.

Effectively cleans the chamber of the dry-heat sterilizer from brown deposits due to the effects of combustion products. It also effectively but carefully cleans the manicure tool from plaque that has formed as a result of exposure to high temperatures, precipitation of combustion products, processing with chemicals, etc. with the exception of products made of aluminum, non-ferrous metals and galvanized parts.

METHOD OF APPLICATION:

To clean the sterilizer:

The tool is ready for use. Thoroughly apply the agent to the inner surface of the lid of the drying oven, the tool tray, the holders for the kraft bags and the sterilization chamber with a soft cloth or a non-abrasive foam sponge. The surface temperature should not be higher than 60°C. Leave on the surface for 30 minutes. Clean thoroughly with a dry cloth or sponge. Before the procedure, make sure that the sore has cooled down. Avoid getting the substance on the heating element, thermal fuse and dry heat temperature sensor.

For delicate cleaning of manicure tools:

Prepare a solution of water and concentrate in a ratio of 1: 2, where 1 is the proportion of concentrate, and 2 is the proportion of water. The product should be added to the water, not the other way around. Load the tools into the prepared solution for 5-15 minutes. depending on the level of pollution. Rinse under running water. Suitable for use in an ultrasound bath.

Composition: Sodium hydroxide 5-15%, solvents 5%, nonionic surfactants <5%.

Use only as intended! Protect from children. Do not mix with other means. Do not inhale vapors, avoid contact with eyes, skin and clothing. Wash hands thoroughly after use. All work with the product should be carried out in protective rubber gloves and a protective mask.